Tips For Replacing a Window Handle
It is easy to replace your window handle from the at-home comforts of your home. Follow these tips for an easy operation and a beautiful looking finish.
Remove the screw covers from your uPVC handle to expose the screws. Measure the spindle to make sure you are getting the right size replacement.
1. Take a measurement of the length of the Spindle.
It is essential to ensure the correct size of the spindle when replacing the window handle. It could affect the tightness or elasticity of the handle as well as whether the handle will lock properly into the frame of the window. The spindle is a steel shaft that connects the handle to the lock in the frame of the window. The spindle is available in either the standard 8mm industry cross-section or the older 9mm versions. The current industry standard is 8mm but this wasn't always the case, so when buying a new handle it is essential to verify the measurements.
Remove the handle. This is easily done by turning the handle to the open position, and unwinding two screws that keep the handle in place (which are usually hidden behind plastic caps that must be removed). Once the handle is removed, take a measurement from the base to the end. This will provide you with the measurements required to purchase a replacement.
There are plenty of options to consider when selecting the right window handle from sleek chrome that blends into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms, or even the more quaint Tudor cottages with curled monkey tail locks! The possibilities are endless, but the most important thing to do is select a style that is suitable for your home.
Espag handles are typically installed to uPVC windows and are always the same size with 43mm centers (2 fixings). Cockspur handles can vary between 58mm and 62mm however there are replacements for both sizes. Window handles made of Cadenza are a different size since they have an angled blade that operates with a multi-point locking mechanism within the window.
discover here when selecting a new window handle is determining what hand you need to use, which is defined by the hand you use to open the door. Inline espag handles can be used with right or left-handed windows. Cranked window handles are only compatible for windows that open in one direction.
2. Take the handle off
Whether the handle is damaged or simply worn out, a window handle that falls off is a major source of frustration. The good news is, you can fix a uPVC handle by yourself. You'll need only a few basic hand tools as well as some time to complete the process.
You must first open the window and ensure that it is not locked. The next step is to remove the screws which hold the handle in position. After the screw caps are removed you will be able remove the handle.
The handle is connected to a spindle inside the window frame. It is fixed by a pin or a screw according to the type of handle. The most common handles are the inline Espagnolette and cockspur handles. Both types of handles are found on casement windows including aluminium ones. You can lock the handles with a key to block access by unauthorised persons from outside. You can also lock the handles by turning them clockwise.
To remove the handle, you will require a flat-bladed screwdriver. When this clip is released the handle will slide off the spindle. After the handle has been removed, you'll need to measure the length of the spindle to ensure that your new handle is compatible with the spindle's length.
Once you have determined the proper size of the handle, screw it in place. It is important to ensure that the handle is securely fastened and that it is rotating in the correct direction (clockwise if the handle is open or counterclockwise if the handle is closed). It is also important to make sure that it has not been fitted upside down.
In the end, you must replace the screw cap caps. Once you have done this then you can test the handle to confirm that it is working correctly. You can also test the locking system by moving the handle from the unlocked position to the locked and back.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is usually the first thing to show signs of wear and wear or damage. It can be caused by natural elements or by regular use, or malicious damage caused by opportunistic criminals who might seek to open a closed window to gain access to your home. A simple fix can resolve the issue and prevent it from repeating itself.
uPVC handles could also be difficult to remove if the locking mechanisms aren't working correctly. In most cases, the issue is solved by replacing the multipoint lock instead of the entire handle and it's certainly worth checking this since it can save you money.
After removing the old handle, you'll have to take off the screws that held it in place. They are usually located on the inside face of the handle base. It may be necessary to use a screwdriver to accomplish this. Be careful not to over tighten the handle, as this can cause it to become loose.
Then you will need to find the screws or pins that hold the handle in place. They're usually on the inside of the base of the handle. You will need a screwdriver to remove them. After you have removed them, you'll be required to replace the caps on the screws should you choose to do so and test the new handle to make sure it's working correctly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then, screw it in. If you're looking to replace the screws ensure that the handle is in a slack position and that the screws are securely attached. Then you can enjoy the newly installed window handle. This will hopefully help you avoid expensive window and door replacements in the near future. Contact us if need more information about this or any aspect of your uPVC window.
4. Install the new handle
Whether you're replacing a broken handle or simply changing it, the process is surprisingly easy and can be accomplished in just a few steps. Identifying the kind of window handle, measuring its spindle length and knowing what tools you'll require to finish the job are crucial. Safety is always the top priority when working with windows and tools. It is also essential to take your time and follow the steps to ensure you have a functioning handle that is safe to use.
To begin, locate the screws that hold the window handle in place. Remove these while firmly gripping the handle to stop it from falling and causing an injury. After the screws have been removed, you can put them in a safe place to be replaced later.
After you have removed the handle, you can begin installing your new handle. It is essential that the handle is fitted perfectly so that it works properly and locks the window in its place. The next step is to slide the metal square on the back of the handle into the hole of your window mechanism, ensuring that it fits securely.
Once the new handle is in place, the last thing to do is replace the screw caps and test it to make sure it functions. If you're not happy with the result or the window doesn't shut or open properly contact our experts for help.
The majority of homes in the UK have uPVC windows, and as such, many of them will require to be replaced in the near future due to wear or breakage. The procedure is simple and can be done by anyone with a little knowledge of DIY. It is crucial that the handle you use is in line with the style and size of your window. Contact our team if you aren't sure of the kind of handle that you need. They'll be able guide you through the choices.